Types of tinting of car windows and their features

Tinting of car windows – a procedure known to every car owner. There are many types of coatings, methods of application, different durability, qualities. There is no point in tinting the windows if the fate of the car is to go to scrap metal. This company gives great money for such cars: https://scrap4cash.com.

Tinting of car windows – a widespread and affordable way of tuning, which can be performed even with your own hands. In addition to purely external changes, tinting allows you to protect the panel and the interior as a whole from fading, significantly increases the comfort of the driver and passengers. And it practically has no disadvantages. What are the requirements for tinting, what is the penalty for non-compliance, what are the varieties and what are the advantages of each?

Tinting – what is it and why?

Tinting of car windows is a type of tuning, in which the glass is specially darkened.

This improvement has a wide range of advantages:

It is used to increase comfort levels by reducing the intake of sunlight.

Prevents prying eyes from peeking into the interior.

Tinted glass that does not let in UV rays helps protect trim elements, seat upholstery, and plastic parts from fading.

The broken glass won’t break into pieces and won’t be able to hurt the passengers inside.

It adds individuality and uniqueness to the car.

At the same time, tinted glass impedes visibility, especially at night, during rain, snow and fog. But the most important thing is that the blurring of car windows is against the law, and headlight tinting is completely forbidden. 

When thinking about tinting, consider the permissible standards. You may tint the rear and side windows as you wish, but the windshield and the front windows are restricted. According to the rules, the light transmission of the windshield must be 75%, the side ones – 70-75%. On the windshield, an opaque strip at the top is allowed, not exceeding the width of 14 centimeters.

Keep in mind – tinting of rear windows is allowed with rear view mirrors and does not apply to mirror film.

Types of tinting

Types are divided according to the method of application and type of material.

According to the technology are distinguished:

removable, distinguished by the ease of installation and removal, a large choice of colors. The disadvantages include short-lived service.

Sputtering is performed in specialized companies, where the glass is applied to polymers and metals. This is an expensive method that has a complex technology and process of execution. The disadvantage is the complete replacement of the glass when it is necessary to remove the tinting, the formation of cracks and glare.

Electronic – technologically advanced option, the cost of which is estimated at 5-10 thousand dollars. It is an interactive coating, created by applying an electromechanical layer. The main disadvantage of the method can be considered its cost.

The most common are film coatings:

Colored film can have different light transmission and color. It is used to give an individual look to the car.

Athermal leaves the glass transparent, while protecting it from UV rays and protecting it from scratches. Such coating is invisible and does not attract attention. A variety of film is chameleon, which changes color depending on the angle of view.

metallized and mirror allows you to keep the temperature in the cabin, reducing heating in summer and heat loss in winter. The disadvantage is the film’s ability to “muffle” signals, which makes it impossible to use the phone, as well as other electronic devices. However, more significantly, the use of such a film is prohibited, due to the violation of the light transmission capacity.

Leave a Reply

Your email address will not be published. Required fields are marked *