Uncategorized

Coating the car body with liquid glass: pros and cons

Coating the body of the car with liquid glass is a new children’s service. The creators promise that with the help of the coating you can not only save and improve the appearance of the car, but also to protect the body. Protecting the body is a good thing. But if it is badly damaged, and with it the main units of the car, it is better to take such a car for recycling: https://towingandscrapcarremoval.ca/scrap-car-removal-scarborough.

What is liquid glass?

The name “liquid glass” reflects, rather, the external manifestation of the action – a glassy sheen, smooth surface, luster. The very same means – it is a chemical polymer composition based on potassium, sodium or lithium. Depending on the basic substance, there are different kinds:

Potassium-based compound is resistant to chemicals, UV rays, and repels water;

A sodium-based compound adds resistance to action to minor mechanical damage;

Lithium-based coating is much rarer, with heat-regulating properties.

Also includes components of aluminum oxide, titanium, forming a thermal protection film, which gives a shine. Silicones in the composition serve as a means to improve the adhesive properties and protect against corrosion. The included surfactants repel dirt and dust particles.

In nature, these substances exist in liquid form, but dry out when applied to the body, forming a persistent film. This film helps keep the paintwork from fading and corrosion, allows it to retain its original gloss, and can repair minor damage. It also provides protection from minor scratches.

Unlike conventional polishes that create a film on the surface, liquid glass is stronger. In addition, it fills in the roughness, restoring the paintwork.

It is most expedient to cover the body with liquid glass of a new car, applying the substance not only to the body, but also to the glasses and hubcaps. However, it is possible to use the product for the treatment of any car, if the level of damage to the paintwork is insignificant.

Advantages of coating

The technology has a number of advantages:

Protection from external factors, scratches. Liquid glass protects the body from chemical and mechanical damage.

Long service life. According to the manufacturers, the action should last for three years. In real Russian conditions the term is up to one year, which is not so little.

Provides reliable repulsion of water and dirt, which will help extend the life of painted elements and prevent corrosion.

Resistant to UV radiation and high temperatures, it helps protect the surface even in summer, when the risk of sunburn is high.

The antistatic effect is especially important in wintertime. The coating eliminates the appearance of static electricity.

Preserves the original appearance of the factory paintwork, the transparency of the composition gives additional gloss and depth of color.

Minuses of coating

Polishing with liquid glass has disadvantages. The main one is the cost, which is much higher compared to other polishing coatings. On average, the cost of the service in car services starts from 6-8 thousand rubles. However, supporters of the method believe that the price is comparable to the usual costs for the same period for washing, polishing, painting and other means of maintaining the coating in perfect condition.

Among the disadvantages – reducing the life of the coating when using brushes to clean the car from snow in the winter and hard brushes at the car wash.

There is also a rather long period of hardening of the coating, about 10 days, during which you should use your car with great care.

How is liquid glass applied?

Compliance with the stages of technology is a prerequisite for the durability of the coating and its reliable service. The approximate algorithm is the same for all compositions.

First of all, the car must be thoroughly washed, total cleaning of all body elements. After that, you can proceed to degreasing the surface with specialized products. Then the bodywork is polished, and if desired, the windows and headlights are removed thoroughly, removing all the particles left after polishing. If there are any chips on the surface, they must be removed and then polished again. Only then can the protective coating be applied. The liquid is prepared according to the instructions, a small amount is applied to the surface and rubbed thoroughly. The number of layers is 10-12. At the end of the process, leave the car to dry for 6-8 hours.

The work should be done in a warm, dry and well-ventilated room, out of the reach of sunlight and dust. The air temperature in the room – from 15 to 30 degrees Celsius.

Is it possible to carry out the treatment by your own hands?

If you have the required preconditions, you may perform the coating by yourself. After a thorough washing of your car, park it in a warm pre-washed garage. Beforehand buy the composition, the hardener, a pipette for mixing. You will also need fiber for manual application, towels, protective seals, sponge.

 

Leave a Reply

Your email address will not be published. Required fields are marked *